Expert Answers about Harley Davidson Street Glide

• What is the Difference Between the B&W Biker Bars BWMC2301 and BWMC2303
• The B&W Biker Bar Motorcycle Tie-Down System for Trailers # BWMC2301 and # BWMC2303 will use the same base so will attach to the trailer the exact same way, but it is the actual bar that attaches to the frame of the bike that will be different. The # BWMC2301 is designed to fit the Harley-Davidson Touring models and a frame width between 10" and 14-1/2". The # BWMC2303 is designed to fit the Harley-Davidson Sportster models and a frame width of 4-1/2" to 7".
  view full answer...


• Is There A Tire Pressure Monitoring System For Motorcycles?
• In my experience, all the TPMS sensors are just as reliable as the next. The Tire Linc TPMS for RVs and Trailers w/ Signal Booster # LC37VR comes with 4 sensors and a repeater. The repeater will boost the signal between the sensors, but in your application I doubt you will need to install it. If you do, it does require a 12/24V hookup. This is a bluetooth system that will work with apple or android! It comes with 4 CR1632 Batteries so you don't have to worry about grabbing those either....
  view full answer...


• Wheel Chock for 2011 Harley Davidson Street Glide with Size 130/70-18 Front Tire
• The stock front tire on a 2011 H-D Street Glide is a 130mm width (size 130/70-18) which is 5.1-inches wide. Our range of motorcycle wheel chocks is shown on the linked page. For the safest transport you might consider the B&W Bike Bar # BWMC2301 which secures your ride without wheel chocks or tie-down straps rubbing on its paint or chrome. Please see the linked video.
  view full answer...


• Does The B&W Biker Bar Require Two Anchors For Installation
• Each model of the B&W Biker Bar Motorcycle Tie-Down System for Trailers will use two anchor plates # BWMC2305 to connect to. The anchors would be secured to the underbelly of the trailer making it hard to use in multiple locations, so you'd really need to buy a set for each trailer you plan to haul with. The base bolts down to the anchors so if you really wanted to you can remove it from the anchors but this would also be somewhat of a hassle.
  view full answer...


• Can the Jensen Heavy Duty Mechless Stereo Be Used on a Motorcycle
• The Jensen Heavy Duty Mechless RV Stereo part # JHD1635BTB is not designed for a motorcycle per say but I don't see any issue using this on your 2007 Harley Davidson Street Glide so long as you have room to mount the stereo and you have access to 12 volt power. The wiring harness that you will need for installation is included (see photo). I am not sure what you mean by an adapter for your hand controls but in addition to the photo of the wiring harness, I have also attached for you...
  view full answer...